Product Links
 
Thanks!
 


... your site was the easiest I found to order what I wanted and I just wanted to say
THANK YOU for that!!
-O.Hanson
Customer Comments
 
Thanks, Karen!
Everything fit fine 
and my
stove is up
and running in
the nick of time :-)

(Pipe) came
yesterday
and down to 32
last night! Thanks again! Kathie
Black Stove Pipe    

BlackStovePipe.jpg
      Black stove pipe has a
      very specific use: 

* Black Stove pipe connects a freestanding wood stove to the chimney

* Cannot be used as a chimney system (inside walls or attic, or outside of the building), it cannot be used inside a masonry chimney as a chimney lining system.

* 24 guage is the minimum thickness recommended to provide a secure smoke passage to the chimney system.

 OldManWrestlingPipe.jpg


Black pipe is grouped below by item
 and the drop-down list allows you to choose the diameter needed when ordering; if a size shows "NA" then the item is not available in that diameter. If your stove has an oddly sized flue outlet, then generally it is most practical to use a pipe increaser to adapt the system to a standard pipe size that offers a greater selection of components. For example, if your stove's flue outlet is 5", install a 5" to 6" increaser which will allow you to use standard 6" diameter stove pipe to complete your installation. Reducing pipe size is not recommended; if a change in pipe size is necessary then increase the pipe size instead of reducing it.

 

   
Measuring Pipe
 


Diameter



Circumference


We sell pipe by Diameter. If your pipe (or your stove's flue outlet) is an oval shape and you're not sure what diameter this equates to, then you may find it easier to measure the circumference of the pipe then translate that number to diameter for ease in ordering - See chart below.
4" Diameter = 12.57" Circumference
5" Diameter = 15.70" Circumference
6" Diameter = 18.85" Circumference
7" Diameter = 22.00" Circumference
8" Diameter = 25.13" Circumference
1' Pipe Length
 

1footpipe.jpg1' black pipe length. Snap lock, 24 gauge. High temp painted black finish. Specify diameter needed.
$10

 

 

 


Size: 

Qty:

2' Pipe Length
 

2footpipe.jpg2' black pipe length. Snap lock, 24 gauge. High temp painted black finish. Specify diameter needed.
$15


Choose: 

Qty:

Slip Connector Pipe Section
 

slipconnector.jpgBlack Pipe Slip Connector / Slip Joint. Allows connection between two pipe joints without cutting pipe. 24 gauge. High temp painted black finish. Specify diameter needed. Approx. installed length is up to 12".
$19


Choose: 

Qty:

Black Pipe Elbows
 

Elbows.jpgPipe Elbow 24 gauge, high temp painted black finish. Adjustable elbow has swivel seams to adjust to 15, 30, 45 or 90 degree turns; corrugated elbow is fixed at 90 degree turn. Specify diameter needed. $15

 

 

 

 

 


Choose: 

Qty:

Self Tapping Pipe Screws
 

screws.jpgSelf Tapping Pipe Screws It is typically recommended to use 3 screws per pipe joint. 
#BP-SCR  $3/18 per pkg.


Qty:

Black Pipe Trim Collar
 

trimcollar.jpgTrim Collar trims around black pipe connection into wall thimble. 24 gauge. High temp painted black finish. Specify INSIDE diameter needed.
$10

 


Choose: 

Qty:

Black Pipe Increaser
 

increaser.jpgIncreaser is used to increase pipe size; crimped on small end. 24 gauge. High temp painted black finish. Choose size, $19

 

 


Choose: 

Qty:

Black Pipe Reducer
 
reducer.jpgReducer is used to decrease pipe size; crimped on large end. (Reducing pipe size is not generally recommended by codes.) 24 gauge. High temp painted black finish. Choose size, $19
Choose: 

Qty:

Black Pipe Coupler
 

coupler.jpgPipe Coupler  Male-to-male connector is crimped on both ends. 24 gauge. High temp painted black finish.
$11

 

 

 


Choose: 

Qty:

Black Pipe Draw Band
 

drawband.jpgDraw Band  Includes strap clamps with screws. 24 gauge. High temp painted black finish. Choose size.
$20

 

 

 

 


Choose: 

Qty:

Oval to Round Adapter
 
ovalroundadapter.jpgOval to Round Adapter
24 gauge, not crimped on either end. High temp painted black finish. Choose size of the ROUND end. $25





Diameter


Circumference


We sell pipe by Diameter. If your pipe (or your stove's flue outlet) is an oval shape and you're not sure what diameter this equates to, then you may find it easier to measure the circumference of the pipe then translate that number to diameter for ease in ordering - See chart below.
4" Diameter = 12.57" Circumference
5" Diameter = 15.70" Circumference
6" Diameter = 18.85" Circumference
7" Diameter = 22.00" Circumference
8" Diameter = 25.13" Circumference

Choose: 

Qty:

Add To Cart
Black Pipe Tee
 

Pipe Tee & Tee Cap Tee pipe is 24 gauge, high temp painted black finish. Preferable to an elbow when used on a rear venting wood stove. Tee cap (sold separately below) aids in cleaning and inspection.

 
 

Order Options: 

Qty:

Add To Cart
Pipe Tee CAP/PLUG
 

TEE-CAP Tee pipe is 24 gauge, high temp painted black finish. Closes off one end of a tee pipe aids in cleaning and inspection.


Diameter: 

Qty:

Add To Cart
Pipe Damper
 

Pipe Damper Black cast iron. Puncture hole in black pipe to install pointed handle. Twist handle to open and close damper. 
NOTE: we DO NOT RECOMMEND use of a pipe damper because doing so can cause excess creosote buildup. We offer them due to so many special requests for them, but we do advise against using them - CAVEAT EMPTOR!

Specify diameter for the size pipe you're installing the damper into.
6" Pipe Damper #108-SP-6 $10
8" Pipe Damper
#108-SP-8 $10


Order Options: 

Qty:

Add To Cart

SHIPPING
Standard shipping charge is 9% of your order total.
Minimum shipping is $9 per order.
Additional freight charges are added to heavy, oversized or fragile items; if freight charge is applicable then it will be noted on the item when you place your order. You may pick up any item from our store in Richmond, VA to save shipping & freight charges. We ship to the continental US. Sales tax applies only to orders shipped within Virginia.


Shipping is available to Alaska, Hawaii & Canada for an additional charge - give us a call and we will provide a custom shipping quote for you,
1-866-427-2625.
 
VICTORIAN FIREPLACE SHOP
Retail Store & Shipping Warehouse in Richmond, Virginia, USA
Toll-Free 1-866-427-2625 •  Local 804-355-1688  • Fax 804-358-3728
Visit our BLOG  •  E-Mail Us
 
 
See All Sizes & Get TECH TIPS
 

STOVEPIPETIPS.jpg

Installation Tips:

- Put 3 screws into each pipe joint. This helps prevent the pipe from vibrating apart if a chimney fire occurs
- The crimped (male) end of the pipe always points TOWARD the stove; this keeps liquid creosote accumulation inside the pipe rather than allowing creosote to dribble outside the pipe!


- Match the stove pipe to the flue outlet size on your appliance; reducing the pipe size is not advised.
- Keep black pipe 18" from combustibles!
- Use the straightest run possible. Do not exceed 3' of horizontal pipe unless the stove manufacturer specifically ALLOWS you to!
- Provide 1/4" rise for every 1' of horizontal run. Never allow stove pipe to slope downwards.
- Don't use more than one 90 degree elbow
- When installing a rear vent stove, exit the stove with a tee, not an elbow. This helps contain creosote buildup in the drop port on the tee.
- When connecting black pipe to the wall thimble, the pipe should extend completely through the thimble into the flue, but not protrude into the flue.This keeps any creosote drip inside the flue.
- Black pipe can only be installed where it's visible in the room. This means it cannot be installed inside a fireplace or inside of a masonry chimney, inside a closet or attic, cannot be used as a wall pass-through.


 

stovehug.jpg
 More Wood Stove Items


Wood Stove
Door Gasket


Fatwood.jpg

Fire Starters


doorwayfan.jpg
Doorway Fan

Gloves.jpg

Gloves

stovepaint.jpg

Stove Paint

stovepolish.jpg

Stove Polish

AshHolder.jpg

Ash Containers

LogHolders.jpg
Log Carriers

WoodStorage.jpg

Wood Storage

steamers.jpg

Kettles, Steamers, Trivets

Thanks!
 

I just received my black pipe boot (oval to round  six inch, item code BP6-OTR) and it fits my 1952 Warm Morning coal stove model 414 perfectly. Just FYI in case others inquire about finding that part for their model 414. Hard to find, but you had it. Easy online order and fast delivery.
 
Thank you.
TBP, South Carolina